CloudShell 2 Case2 for XU4 - Smoky Blue

Oem CloudShell 2 Case2 for XU4 - Smoky Blue

6.192,09 TL
  • Ürün Açıklaması
  • Ürünün Özellikleri
  • Kampanyalar
  • İptal İade Koşulları
  • Taksit Bilgileri
  • Soru ve Cevap (0)

AÇIKLAMA CloudShell 2 Case2 for XU4 - Smoky Blue

 

Akrilik kasa, orijinal CloudShell2'den yeni bir tasarıma sahip

ODROID-XU4 için CloudShell-2 Case2, RAID desteğine sahip uygun fiyatlı bir DIY Ağ Bağlantılı Depolama (NAS) Çözümüdür. Orijinal CloudShell gibi, ön tarafta renkli bir LCD ve IR alıcısı içerir, ancak USB Bağlantılı SCSI (UAS veya UASP) ve kullanışlı veri depolama teknolojileri (RAID-0, RAID-1 ve SPAN) için destek ekler. 3,5 inç HDD/SSD sürücüler için çift yuva sunar. CloudShell-2 ayrıca, UAS'yi destekleyen ve çift 3,5 inç SATA HDD/SDD depolama kurulumuna izin veren bir USB 3.0 - SATA köprüsü (JMicron JMS561) içerir.

 

ÖZELLİKLER

 

The Acrylic case has new design from the original CloudShell2 
The CloudShell-2 Case2 for the ODROID-XU4 is an affordable DIY Network Attached Storage (NAS) Solution with RAID support. Like the original CloudShell, it includes a color LCD and IR receiver on the front, but adds support for USB Attached SCSI (UAS or UASP) and useful data storage technologies (RAID-0, RAID-1 and SPAN). It offers dual slots for 3.5” HDD/SSD drives. The CloudShell-2 also includes a USB 3.0 to SATA bridge (JMicron JMS561), which supports UAS and allows installation of a dual 3.5" SATA HDD/SDD storages. 
Further information is available in the WiKi. : https://wiki.odroid.com/accessory/add-on_boards/xu4_cloudshell2/cs2_assembling2
cloudshell2.png Package include

A. Left piece 
B. Right piece 
C. Top piece 
D. Front piece 
E. Rear piece 
F. Fan_holder piece 
G. Top_holder piece 
H. Locker piece 
I. Fan 
J. Current limit fan board 
K. USB 3.0 type A-micro B cable 
L. 15V/4A Power Supply 
M. 30Pin GPIO Ribbon Cable 
N. CloudShell2 Board 
O. 2x 10mm Truss Head 
P. 4x 10mm Pan Head 
Q. 4x 8mm female hex XU4 spacer 
R. 8x 5mm Round Head 
S. 12x 10mm Round Head 

Note!!
** 3pin Power Cord is sold separately. 
** XU4 and HDDs are not included.
** Do not apply higher than 16Volt.
Specifications

Storage
- 2 Drive Bays
- Supported size : 3.5" SATA HDD

Supported RAID Type
- Basic(PM)
- JBOD
- RAID 0
- RAID 1 

Appearance
- Color: Clear, Smoky Blue
- Size (Height x Width x Depth): 140 x 110 x 221.5 mm
- Weight: 0.64kg(without HDD)

Others
- Fan 92 mm x 92 mm (cool and quiet modes)
- IR Receiver (remote controller not included)
- 2.8" 320x240 TFT LCD
- 15V/4A Power Supply (included)





 
Hardware Block Diagram
 
cs2_hw_block.png

CLOUDSHELL 2 BOARD DETAIL

Cloudshell2Frontcomponents.jpg


320x240 TFT LCD Display example
output.png


Performance : 

Local storage speed test with two WD 6TB Red NAS HDDs on Kernel 4.9 LTS with USAP driver.


Cloudshell2IORead-WritePerformance.png

Cloudshell 2 is a great choice to build you own DIY high performance Network Storage!

Cloudshell2FTPandSambaperformance.png

Neden idefix?

Kolay İade
Kolay İade

Siparişinizi teslim aldığınız tarihten itibaren 14 gün içinde iade edebilir, iade sürecinin tamamlanmasının ardındansa ödemenizi hızla geri alabilirsiniz.

Müşteri Odaklı Deneyim
Müşteri Odaklı Deneyim

Kullanıcı dostu ara yüzümüz tüm ihtiyaçlarınıza eksiksiz yanıt verebilmek için tasarlandı. Deneyiminizi uçtan uca kusursuz kılmak adına çağrı merkezimiz ve canlı destek hattımızla ihtiyaç duyduğunuz her anda yanınızdayız!

Hızlı ve Sorunsuz Teslimat
Hızlı ve Sorunsuz Teslimat

Siparişlerinizin bir an önce ulaşması için sabırsızlandığınızın farkındayız. Sunduğumuz farklı teslimat seçenekleri arasından size en uygununu belirlemeniz, siparişinizi olabildiğince çabuk veya dilediğiniz zaman aralığında sorunsuz bir biçimde teslim etmemiz için yeterli.