Bambu Lab A1 Mini Combo Çok Renkli 3D Yazıcı

Bambu Lab A1 Mini Combo: Kompakt, Akıllı ve Çok Renkli 3D Yazıcı

Bambu Lab A1 Mini Combo 3D Yazıcı

 

Bambu Lab

A1 mini Combo 

·         Multi-Color Printing

·         Plug-N-Play

·         Active Flow Rate Compensation

·         Full Auto Calibration

·         Active Motor Noise Cancelling

·         High Speed Precision

 

Multi-Color Printing 

The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.

 

Active Flow Rate Compensation 

The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

 

Full Auto Calibration 

The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

 

Plug-N-Play 

The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.

 

Active Motor Noise Cancelling 

The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.

 

Bed Slinger, with CoreXY Speed And Quality（High-Speed Precision) 

Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

 

Sync with Bambu Studio and Bambu Handy 

Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.

 

A1 mini Tech Specs 

Item		A1 mini Specification
Body	Build Volume(W*D*H)	180*180*180 mm³
Toolhead	Hot End	All-Metal
	Nozzle	Stainless Steel
	Max Hot End Temperature	300 °C
	Nozzle Diameter	0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm
Heatbed	Build Plate	Bambu Textured PEI Plate (Included) Bambu Smooth PEI Plate
	Max Build Plate Temperature	80°C
Speed	Max Speed of Tool Head	500mm/s
	Max Acceleration of Tool Head	10m/s²
Supported Filament	PLA, PETG, TPU, PVA	Ideal
	ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer	Not Recommended
Sensors	Monitoring Camera	Low Framerate Camera (Up to 1080P) Timelapse Supported
	Filament Run Out Sensor	Yes
	Filament Odometry	Yes
	Power Loss Recover	Yes
	Filament Tangle Sensor	Yes
Physical Dimensions	A1 mini : 347*315*365 mm³ , Package size : 385*430*460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kg A1 mini Combo : Package size 385*430*495 mm³ , Gross weight (AMS lite included) 10.2 kg