MERCK 109990 Silver nitrate solution 0,1 mol/l (0,1 N)
Description
Catalogue Number 109990
Product Information
HS Code 3822 00 00
Physicochemical Information
Density 1.27 g/cm3 (20 °C)
pH value 7.9 (H?O, 20 °C)
Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)
H290: May be corrosive to metals.
H314: Causes severe skin burns and eye damage.
H410: Very toxic to aquatic life with long lasting effects.
Precautionary Statement(s)
P273: Avoid release to the environment.
P280: Wear protective gloves/ protective clothing/ eye protection/ face protection.
P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P310: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
Storage class 8B Non combustible, corrosive hazardous materials
WGK WGK 3 highly water endangering
Disposal 28 Aqueous solutions: Container D.
Safety Information
Hazard Symbols
Corrosive Dangerous for the environment
Categories of danger corrosive, dangerous for the environment
R Phrase R 34. 50/53 Causes burns. Very toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment.
S Phrase S 26. 36/37/39. 45. 61 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable protective clothing, gloves and eye/face protection. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). Avoid release to the environment. Refer to special instructions/ Safety data sheets.
Storage and Shipping Information
Storage
Storage temperature: no restrictions.
Transport Information
Declaration (railroad and road) ADR, RID UN 1760 , 8, II
Declaration (transport by air) IATA. DGR UN 1760 , 8, II
Declaration (transport by sea) IMDG. Code UN 1760 , 8, II
Specifications
Concentration after dilution to 1 liter: c(AgNO?) = 0.1 mol/l
Amount of substance concentration 0.1000 mol/l
The concentration of this solution was determined with volumetric standard sodium chloride (article number 1.02406).
The determined titer at 20°C was 1.000 with an expanded measurement uncertainty of ± 0.004 (k=2 coverage factor for 95% coverage probability).
The certified value is traceable to primary standard NIST SRM 999b (NIST: National Institute of Standards and Technology, USA) by means of volumetric standard sodium chloride, measured in the accredited calibration laboratory of Merck KGaA, Darmstadt, Germany in accordance to DIN EN ISO/IEC 17025
Neden idefix?
Siparişinizi teslim aldığınız tarihten itibaren 14 gün içinde iade edebilir, iade sürecinin tamamlanmasının ardındansa ödemenizi hızla geri alabilirsiniz.
Kullanıcı dostu ara yüzümüz tüm ihtiyaçlarınıza eksiksiz yanıt verebilmek için tasarlandı. Deneyiminizi uçtan uca kusursuz kılmak adına çağrı merkezimiz ve canlı destek hattımızla ihtiyaç duyduğunuz her anda yanınızdayız!
Siparişlerinizin bir an önce ulaşması için sabırsızlandığınızın farkındayız. Sunduğumuz farklı teslimat seçenekleri arasından size en uygununu belirlemeniz, siparişinizi olabildiğince çabuk veya dilediğiniz zaman aralığında sorunsuz bir biçimde teslim etmemiz için yeterli.
