Kıvılcım Gemaş EcoSlim 72 LED li 24W Gün Işığı Havuz Sualtı Aydınlatma Lambası- Underwater Light-ToptancıyızBiz

Gemaş EcoSlim 72 LED li 24W Gün Işığı Havuz Sualtı Aydınlatma Lambası- Underwater Light-ToptancıyızBiz “ECOSlimLED” Havuz Sualtı Aydınlatma Lambası. Kovansız, Tek Renkli Underwater Lights for Concrete Pools

Çerçeve beyaz ABS veya şeffaf plastikten mamul. 72 SMD LED’li; polikarbonat lamba gövdesi, epoksi PCB’si ve 1,25 m uzunlugunda 2 x 0,75’lik kablosu ile komple. 120°-IP68. Duvar montajı mevcut havuz duvarına dubel yardımıyla direkt vidalanarak veya duvar montaj aparatı yardımıyla yapılır. Çerçevesiz lamba piyasada mevcut tüm PAR56 ampullu ürünlerde LED dönüşümü için yedek ampul olarak kullanılabilir.

Description

This LED lights has been designed to be used totally submerged in water. It is a Class III electric apparatus with very low safety voltage (12V with alternating current).

Technical Features

• Special, elegant flat design. Resin isolated cable connection, 2 years unconditional water leakage warranty.

• Ultra slim design which has only 35 mm thickness from the wall.

• It is suitable with every PAR 56 bulb with niche in the market

• Easy installment in concrete pools only with 2 screws.

• Comes with liner installation kit which let consumers to install easier in liner pools.

• The length of the cable is 2 m and the cross section is 2x1,5 mm.

• Polycarbonate light body.

• Epoxy PCB

• IP68 quality standard.

• Replacement kit include all necessary fixtures to be installed in the niches.

Light Specification

All led models are in A+ energy class.

“ECOSlimLED” Underwater Light without Niche, Single Color. Frame made of ABS or Transparent Plastic. Complete with 72 SMD LEDs: Polycarbonate light body, epoxy PCB and 2 x 0,75 mm cable of 1,5 m length. 120° - IP68. Wall mounting is done by fixing the light directly onto the pool wall with stainless steel screws and plugs. Optional wall mounting apparatus is available. The light, without the frame, can be used as a replacement bulb for LED conversion of all PAR56 products available on the market. For the transparent ABS frame, O should be erased from the end of the below product codes.