Assmann Digitus DS-45333 USB Type C to 3xHDMI 2.0 DP 1.4 4K 60hz MSD Usb Ekran Kartı Adaptörü

Digitus DS-45333 USB Type C to 3xHDMI 2.0 DP 1.4 4K 60hz MSD Usb Ekran Kartı Adaptörü 1x USB-C™ input3x HDMI outputSupports DP 1.4 (Alt mode) with maximum 8.1 Gbps per channel, max. 32.4 Gbps on 4 channelsSupports Windows OS (11, 10)Resolutions 3 external monitors - MST mode: max. 1x 4K/60Hz + 2x 4K/30HzResolutions 2 external monitors - MST mode: max. 2x 4K/60HzPower supply via a USB-C™ connection - BUS poweredNo driver or software required - Configuration via the display settings in Windows OSSupports 3 display modes: Mirror (1 signal mirrored on 3 displays), extend (3 signals on 3 displays), distribute (1 signal distributed across 3 displays)HDCP 2.2 & 1.4Supports HDR (High Dynamic Range)Supports MST (Multi Stream Transport) & SST - Single Stream TransportHousing: ABSOperating temperature: 0-45 °Standby power consumption: approx. 1WDimensions: L 26.3 x W 3.6 x H 1.15 cmWeight: 55 gColor: BlackNote:To achieve the resolutions stated above, the host PC should support DP 1.4 (Alt mode). If your PC only supports DP 1.2, the corresponding resolutions are reduced due to the bandwidth restrictionThe resolution combinations stated above are a theoretical reference, the actual resolutions depend from the connected host PC as well as the displayIn order to use the full scope of features, make sure that your device (graphics card) uses DP 1.4.If you use a DisplayPort 1.1 graphics card, the MST Hub acts as a splitter and mirrors your video source on all displaysFunctionality can be restricted depending on the specifications of your device and operating systemMST Hubs cannot increase the number of screens supported by a graphics card. Every graphics card has a limited number of screens that it can support. Please check your specifications in advance.Requires at least a host system with DP 1.2/HBR2/MST or higher (recommended)Supports AMD, Nvidia and Intel graphics cards Audio: no1x MST Video Hub (USB-C™ -> 3x HDMI)1x QIG