INTERBUILD REAL WOOD Interbuild Hardwax Oil (0%) Voc 250 Ml Mobilya Ve Ahşap Tezgah Yağı - Kahverengi

"Probably the best wood oil in the world" INTERBUILD Zero% VOC Hardwaxoil
Approved for contact with foodstuffs TIPS when used for OUTDOOR furniture Store furniture inside in winter or cover with a plastic sheet Use a hard brush and water to clean moss and mushrooms! When the surface dries, sand it with fine sandpaper, wipe the powder with a very light damp cloth and apply a layer of hard wax oil
After a day, repeat the lubrication
Maintenance with a new layer once or twice a season For cars and car windows that are left out in winter, cleaning and lubrication should be carried out at the beginning and end of the season
Remove the autumn leaves before the snowfall! HARD WAX OIL USE Our hard wax oil is a mixture of pure vegetable oils and candles cooked together at high temperature to produce a micromolecular oil that penetrates well into wood and leaves a wax film on top, giving it an extremely smooth, water
repellent and durable surface
Before processing all wood, including cutting boards, furniture, floors, etc
: 1
Make sure the wood is dry 2
Lightly polish the wood with fine sandpaper 3
Wipe the powder with a slightly damp cloth 4
Lubricate the product with plenty of oil, after a few minutes wipe the excess oil and spread it well with a clean cloth
5
Lubricate the short ends of wood abundantly several times, because this is where wood absorbs the most from the capillaries of the tip wood
6
After use, put the used cloth in a jar filled with water, as the risk of spontaneous ignition is minimal
7
If the surface absorbs a lot of oil and feels dry, repeat the process the next day
Apply the oil at room temperature (10
35 °C)
Oil is ready to be applied to products as is
Do not mix with any reiner and apply several layers to get a thicker surface if desired
Our hard wax oil contains ZERO VOC, which means that 100% of what is in the jar will remain on the wooden surface you use as protection
About consumption and price comparison for lubricated surfaces Since most other oils are sold with a 40
60% cheap mixture of tinner/solvent (VOC) that will evaporate into the air after application, you can never compare the price of a liter of wood oils
This means that only 60
40% of what you buy will remain on the surface as protection
Unfortunately, this evaporation of volatile organic compounds (thinner) contributes to climate change
There is no evaporation as we do not mix it with any solvents for our hard wax oil! (VOC = Volatile Organic Compound) You should compare the price of m2 of protection of the same quality for wood oils
That is, you may need to buy 3 times more oil than others to get the same real fat/wax coverage as our oil
Our hardwax oil covers up to 40 m2 per liter for 1 layer, 1 box 250 ml 8
10m2 area, which is very unique
Comparing consumption in this way makes our oil very affordable